Senin, 31 Januari 2011

iPhone 3GS 3.1.3 Untethered Jailbreak (Not Unlock)

I successfully jailbroke iPhone 3GS on the 3.1.3 firmware and baseband 05.12.01, using Spirit. Spirit is an untethred jailbreak developed by an iPhone hacker named Comex. You can only jailbreak, not unlock, the iDevices on 3.1.2, 3.1.3 and 3.2 firmware. It doesn't currently support iPhone OS 4.0 Beta. You can download this jailbreak for Mac OS X and Windows from this site: spiritjb.com With Windows there are some problems. So click on Spirit, then properties and then compatibility. I recommend choosing Wndows 98/Me. Comex has now realeased an update that should solve this problem and it won't delete all your photos from camera rolll I showed for comformation Cydia app developed by Jay Freeman, my firmware version (3.1.3) and modem firmware (baseband) version (05.12.01). I also showed the Voice Control, only available on iPhone 3GS and iPod Touch 3G. I rebooted the iPhone aswell, so you could see that in an untethered jailbreak. Shame is that, it doesn't feature a carrier unlock, which I so desperatly need. We would have to wait until this summer, when the 4.0 firmware comes out and with it an carrier unlock. Geohot has registered limera1n.com, so keep an eye on that, it maybe an unlock. And remember, don't try Thunderst0rm (now Sn0wstorm), beacause it's a fake. UPDATE: Dev Team have realeased the carrier unlock finally. You can unlock any iPhone from basebands 04.26.08 to 05.12.01. The 05.13.04 baseband can only be unlocked on iPhone 3G, iPhone 3GS only via custom upgrade ...

TubeHome.com Video from everywhere!

Continue reading →

Minggu, 30 Januari 2011

Asus UL30A Notebook Windows XP Drivers

Chipset Driver
Download

Microsoft KB888111 Hotfix
Microsoft KB888111 Hotfix FOR WIN XP
Download
(only for XP SP2 or prior version)

Sound Audio Driver
Realtek Audio Driver

Graphics/Video/VGA Display Driver
Intel Graphics Driver
Download

Ethernet LAN Network Driver
Atheros Lan Driver
Download

Card Reader Driver
Alcor AU6433 Card Reader Driver
Download

Touchpad Driver
Elantech Touchpad Driver
Download

ASUS Wireless Switch (Wireless Console 3) Utility
Download

Intel(R) 1000 WiFi Wireless LAN Driver
Download

Azurewave NE785 Wireless LAN Driver and Utility
Download

Intel 5100/5150 WiFi Wireless LAN Driver
Download

Bluetooth Driver
Download
Azurewave BlueTooth driver for Windows XP
(Please first install the Wireless Console Utility before BlueTooth installation)

Webcam Camera Driver (Suyin)
Suyin Camera Driver
Download

Webcam Camera Driver (Chicony)
Chicony Camera Driver
Download
Continue reading →

BlackBerry_Hardware_Solution

BlackBerry Hardware Solution By tahsanhot ballamobile

Here
Continue reading →

Jumat, 28 Januari 2011

Kamis, 27 Januari 2011

LG GW382F Unlocked

LG GW382F Unlocked

Use SE-Tool version 1.09

First step:
1. Choose LG CF360,
2. Read GDFS, (hold SPACE button, plug in micro USB)

Second step:
1. tick Signed Mode,
2. Unlock ( hold SPACE button, plug in micro USB)

Done !!!

__________________________________________________ __________________

Will backup GDFS now.
ChipID:D900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35351404000313]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35351404000313 CERT:RED
LDR:CXC1723918_D2_DB3200_PRODUCTION_LOADER_ACC_SDR AM_SETOOL2
LDR CAPS:SYSTEM FLASH SIGNATURE
LDR:CXC1723919_1D2_DB3200_PRODUCTION_LOADER_APP_SD RAM_JEFF_CABS_SETOOL2
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
got 227 GDFS units
got 1202 GDFS units
gdfs read done,gdfs_35351404000313.zip written
Phone detached
Elapsed: 33 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID:D900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35351404000313]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35351404000313 CERT:RED
LDR:CXC1723918_D2_DB3200_PRODUCTION_LOADER_ACC_SDR AM_SETOOL2
LDR CAPS:SYSTEM FLASH SIGNATURE
LDR:CXC1723919_1D2_DB3200_PRODUCTION_LOADER_APP_SD RAM_JEFF_CABS_SETOOL2
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
WRITING CLEAR SIMLOCK UNITS...
SIMLOCK CODES SET TO "76743602"
SIGNING...
Unlock DONE
Elapsed: 13 secs.

Continue reading →

CycloneBox FREE and STANDALONE SL3 Unlock RELEASED!!!

CycloneBox FREE and STANDALONE SL3 Unlock RELEASED!!!
Without Any Activation or Logs



Small manual how-it-works:

1. Read SL3 Log file (BB5, Simlock Tabs, Group "Local SL3 Bruteforce", Button Read LOG File)

2. Save the readen Log File somewhere. It contains necessary information needed to calculate code.

3. Use "log2cod Calculator" to calculate COD file. Processing speed depends on GPU installed at your PC. log2cod calculator supports calculation resume (on power-off fail, etc).

4. Once COD file is ready, use "Send COD File to Server" button to Submit Calculation Result to our server for further processing

5. You can unlock your phone now as it would be unlocked by our servers (Select SL3 Online RPL Calculation method, and press Direct Unlock), you may also use Manual Mode if phone is away.


Note1. No, this will not work with Mobile GPU (ati mobility, nvidia m... , )

Note2. You need special GPU (or 2xgpu in crossfire), check here (more sha1 perf points - better speed) GPU estimations

Note3. Reading log, calculating process is standalone. After calculating COD file, it needs be submitted to server (for calculating level1-level7 codes), its immediatly and free ofcourse...
Note4. We tested on both gpu:
- 2xHD5970 and searching 1 possiblity is ~22 seconds (total 220000 seconds - worst case - ~61 hours).
- Old Nvidia GT8800 GPU ( i think it have about 4 years now ), searching 1 possibilty is ~660 seconds (total 6600000 seconds, thus worst case is ~1833 hours (76 days))

Note5. I got "Too many child process failure" message. That means your GPU is unsupported, or is too weak.. OR some problem really occured.

Note6. We aren't disabling our servers, since this solution will suit only for some (5%) of ppls, and needs investment in HW (with invested 2500€, can make 10-12 SL3 phones per month).


Download Link:
http://www.karwos.hk/CycloneSL3_Standalone.rar


PS. yes, no need to pay for USELESS MX Credits!!

Continue reading →

Palm Pre Plus Lock to AT&T Success Unlock Via USB

Palm Pre Plus Success Unlock Via USB





I Follow This Procedure!
Palm Pre2, Palm Pre & Pixi Unlock Instructions
Run the unlock client from “START > Multi Unlock Client > Unlock Client”, you will also need to enter your username
and password and click “save login data” and make sure “main Server” is selected under the settings tab, make sure
you click “Save Login Data”
NOTE: Pix, pre & Pre2 require different credits; please insure your account has the required service active for the type
of phone you are trying to unlock.
1. On the phone enter “Diag Mode”
a. On your Palm Pre go to ‘Device Info’, write down the 12 digit serial number (please remember it is case
Sensitive)
b. Enter the serial number into the calculator “START > Multi Unlock Client > Pre Pass Through Keygen”
(exactly the same if you have a pixi ot a pre)
c. Go to the phone app on your palm pre or pixi
d. Start typing #*8727277# and press DIAL as if trying to call this number
e. Enter the code from the ‘Pre Pass Through Keygen’ and click ‘validate’ (if requested)
f. In the window that appears, select “Configure USB pass-through”
g. Set DIAG for USB Port 1
h. Connect your Phone to the PC using USB cable.
i. If/when prompted by the phone select “Just Charge”
2. You need to install drivers when the new hardware found message dialog appears on your PC
(see page4 for more info)
a. When asked if you would like windows to search for a driver, select “No not this time”, Then select
“Install from a list or specific location”, then click “Next”
b. Then select “Search for the best driver in these locations”, then check “Include the following location”
c. on the next screen click on “Browse”
d. Browse to “C:\Program Files\Multi Unlock Client\Palm Pre\Drivers” or “C:\Program Files\Multi
Unlock Client\Palm Pixi\Drivers” depending on the phone you are unlocking.
e. Click “Next” and the wizard will install the drivers
f. Once the drivers are installed, Unplug & replug phone, click “OK” on the unlock client dialog box.
3. Unplug & Replug Phone to USB cable.
4. Select Palm Tab, and replug phone.
5. Now to Unlock Your Phone
a. When the software tells you that “you may proceed”.
b. Click “Unlock” , the software will now unlock your phone
c. Where possible the blocked counters will be reset.
Continue reading →

Android Phones - Installing Application

No Application Request here.
Only Post if you ve question regarding installing application=-

How to Install Applications


To install applications using Android Market perform the following steps:
  • Open the Android Market application in the Applications menu.
  • You can select any option - Applications, Games, Search or My Downloads based on what you want to do. You will then get a list of applications or games to choose from.
  • You can also search for any particular application. You will then get a list of apps with their description and rating.
  • Click on the application you want and you will get more details of that application - the number of downloads and user comments.
  • To install it, just click on the Install button on the bottom of the screen.
  • In the next screen, it will give you more details about the application including the different functionalities it will need to access. Just click on OK to finish installing the application.

Using the Android SDK

There is one more method that can be used, you can install APK files into your phone using the Android SDK. Download the Android SDK.
First of all, install the Android SDK on your computer. You will also need to install the Android USB drivers to connect the SDK to your phone via USB. You can download it from here - USB Driver for Windows | Android Developers .

To install applications from other sources, you also need go to Settings -> Application Settings and enable Unknown Sources. Also go to Settings -> SD Card and Phone Storage -> Disable Use for USB Storage. You can enable it again later.

Next, just open Command Prompt and type: adb install path/file.apk
where path is the full path to the APK file and file is the name of the APK application file. Your application is now installed. This is all you need to do, now just open the application on your phone and use it.

Using the Application

You can rate and even leave a comment on the Android Market about the application.
To access the application, just go to your Menu and select the application you want to launch.
To check a list of all the applications you have downloaded, open up Android Market again and select the My Downloads option.
Check out some cool Android applications to install.

How to Remove Applications

To uninstall applications that you installed using the Android Market:
  • Open the Google Android Menu.
  • Go to the Settings icon and select Applications.
  • Next, click on Manage.
  • You will be presented with a list of applications you have installed.
  • Select the application you want to uninstall, and click the Uninstall button.
Continue reading →

i9000 Galaxy Download Mode Solution

Too many people having the problem to put i9000 in downlaod mode to remove the user code ..

First Solution :

Code:
1. REMOVE BATTERY & PUT IT BACK

2. HOLD VOLUME UP BUTTON & MIDDLE BUTTON (HOME BUTTON)

3 WHILE HOLDING THIS TWO BUTTON PRESS POWER BUTTON AND REALEASE(PRESS POWER BUTTON ONLY ONCE)

4.IT WILL POP UP WITH HARD RESET MENU

5. SCROLL DOWN TO FACTORY RESET WITH VOLUME DOWN BUTTON THEN PRESS CENTER BUTTON OR HOME BUTTON

6. THEN PRESS VOLUME DOWN BUTTON TO SELECT YES FACTORY SETTINGS THEN PRESS CENTER BUTTON

7. SELECT REBOOT DEVICE AND PRESS CENTER BUTTON

2nd Solution :

Code:
1. Turn the power off. If your Samsung Galaxy S is frozen, pull the battery out and reinsert it
2. Hold the Volume Down button
3. Press and release the Power button
4. You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Press and release the Power button
7. Now simply confirm your decision: Volume Up for YES and Volume Down for NO
Final Solution :

Code:
Download Android sdk

Extract this at the loacation c:\AndroidSDK

Connect phone to PC and Install Drivers

now go to Start > RUN > type cmd

go to this directrory " c:\AndroidSDK\tools "

now type " adb reboot download "

Your phone will reboot and will go into bootmode :)
Now Use this method to remove the security code :

i-thinkBIG: Samsung Galaxy S Flashed via ODIN


Note that .. above method will help you to :


Debrand the phone

Flashing the phone

Remove User Data


Install Chinese langauage into the phone
Continue reading →

Android Phones - Hard Reset


Android Phones - Hard Reset


Please post here only Hard Reset of Android Phones
No question or how to please.


Help me to keep this thread clean

A big thanks to www.hard-reset.eu for their resource

"Performing a factory data reset deletes all data, including downloaded applications, and resets the device back to its initial state—the state before you turned on the device for the first time.
Important Make sure to back up important data you have on the device before you perform a factory data reset."


HTC Dream

1. Turn the G1 off. If it’s frozen on, take the battery out and put it back in the unit.

2. Hold the Home and Power keys down at same time for about 25 seconds. You will see a yellow triangle screen with exclamation point in the
middle.

Now to wipe the device clean:

3. Press Alt+L.
4. Press Alt+W for a factory reset.
5. Press the Home and Back keys again for about 25 seconds.
The device should then reset again and the hard reset is complete.

++++++++++++++++++++++++++++++++++++++++++++++++++

HTC Magic

1. With the phone turned off, press and hold the HOME and BACK
2. Briefly press the END CALL/POWER button while continuing to pressHOME and BACK buttons.
3. When you see the screen with the 3 Android images, release the HOME and BACK buttons, and then press the TRACKBALL.

Tip
: If your phone hangs or freezes, remove the battery then wait for a few seconds, and then re-install it. After re-installing the battery, turn on the phone.



++++++++++++++++++++++++++++++++++++++++++++++++++

HTC Hero


1. With the phone turned off, press and hold the HOME and BACKand then briefly press the END CALL/POWER button. The reset process will start after a few seconds.
2. Wait for the phone to finish the reset process and then press MENU.

Tip : If your phone hangs or freezes, remove the battery then wait for a few seconds, and then re-install it. After re-installing the battery, turn on the phone.

++++++++++++++++++++++++++++++++++++++++++++++++++

HTC Tattoo


1. With the phone turned off, press and hold the HOME and BACKand then briefly press the END CALL/POWER button.
2. Press the ENTER button to begin the reset process.

Tip If your phone hangs or freezes, remove the battery then wait for a few seconds, and then re-install it. After re-installing the battery, turn on the phone.

++++++++++++++++++++++++++++++++++++++++++++++++++

HTC Desire
: reserved

++++++++++++++++++++++++++++++++++++++++++++++++++

HTC Whitestone :
reserved
Continue reading →

blackberry FREE Unlocking codes Request [ONLY HERE]

blackberry FREE Unlocking codes Request:

post your imei and mep & wait for your unlocking code



Instructions for Unlocking BlackBerry (All Models)

Always the Best way to Unlock Your Phone is by using the MEP2 code or Unlock code.

After u got the code follow the instructions below......

BlackBerry Unlock Instructions (9800)

* Insert a foreign SIM Card
* Power on the phone
* When prompted, enter your unlock code

BlackBerry Unlock Instructions (83xx/85xx/88xx/8900/9000/9300/96xx/97xx)

* Ensure a SIM Card is inserted
* Go to 'Manage Connections'
* Click on 'Turn All Connections Off'
* Go to 'Options'
* Click on 'Advanced Options'
* Click on 'SIM Card'
* Type 'MEPD' (letters will not appear on-screen but a menu will pop up.)
* Type 'MEP2' (user will be prompted to enter MEP code)
* Enter the MEP2 code (CONFIRM you get "Code Accepted" message)
o *If you also have a MEP4 code, type 'MEP4' (you will be prompted to enter MEP code)
o Enter the MEP4 code (CONFIRM you get "Code Accepted" message)
* Reboot device
* Go to 'Manage Connections'
* Click on 'Restore Connections'
* Device is now unlocked

BlackBerry Unlock Instructions (95xx)

* Ensure a SIM Card is inserted
* Go to 'Manage Connections'
* Click on 'Turn All Connections Off'
* Go to 'Options'
* Click on 'Advanced Options'
* Click on 'SIM Card'
* Tilt the phone horizontally, click the BlackBerry button and Show keyboard
* Type 'MEPD' (letters will not appear on-screen but a menu will pop up.)
o *If MEPD doesn't work, try MEPPD
* Type 'MEP2' (user will be prompted to enter MEP code)
o *If MEP2 doesn't work, try MEPP2
* Enter the MEP2 code (CONFIRM you get "Code Accepted" message)
o *If you also have a MEP4 code, type 'MEP4' (you will be prompted to enter MEP code)
o Enter the MEP4 code (CONFIRM you get "Code Accepted" message)
* Reboot device
* Go to 'Manage Connections'
* Click on 'Restore Connections'
* Device is now unlocked

Blackberry Instructions (81xx/82xx/9100)

* Ensure a SIM Card is inserted
* Go to 'Manage Connections'
* Click on 'Turn All Connections Off'
* Go to 'Options'
* Click on 'Advanced Options'
* Click on 'SIM Card'
* Type 'MEPPD' (letters will not appear on-screen but a menu will pop up.)
* Type 'MEPP2' (*Note- for Telus, use MEPP4. You will be prompted to enter MEP code)
* Enter the unlock code (CONFIRM you get "Code Accepted" message)
* Reboot device
* Go to 'Manage Connections'
* Click on 'Restore Connections'
* Device is now unlocked

Old School BlackBerry Instructions (87xx & Older)

* Ensure a SIM Card is inserted
* Go to 'Manage Connections'
* Click on 'Turn All Connections Off'
* Go to 'Options'
* Click on 'Advanced Options'
* Click on 'SIM Card'
* Type 'MEPD' (letters will not appear on-screen but a menu will pop up.)
* Hold ALT key and type 'MEPE' (user will be prompted to enter MEP code)
* Enter the unlock code (CONFIRM you get "Code Accepted" message)
* Reboot device
* Go to 'Manage Connections'
* Click on 'Restore Connections'
* Device is now unlocked


Continue reading →

MTBox CG Ver 1.4 Released !

MTBox CG Ver 1.4 Released !
  • Nokia NaviFirm (Nokia FW downloader) added for free for All MTBox Users
MTB CG Ver 1.4 Download Links :Direct HotFile RapidShare

Discussion : HERE
Continue reading →

SmartMoto v4.09

Please let us introduce new version of SmartMoto v4.09 and S-Card v3.06

With this release we are glad to introduce following options:
  1. World's first! Support of the following Alcatel models with disabled unlock code menu*:

    • OT-103 (2ARGTE5-17H XM17CB40; 2ATLMX3-175 XM17NH40)
    • OT-203 (2BRGTE5-365 XM36CC20; 2BRGTE5-37B XM37CC30)
    • OT-208 (2ARGUG1-765 XM76CE21)
    • OT-216 (2ERGMG2-462 XP46CB01)
    • OT-303 (2ARGTE2-169 XI16CF00; 2BMSUA1-16G XI16CS13)
    • OT-305 (2DCFMK1-16C XP16CU11)
    • OT-508 (2BTGMX1-365 XP36NE12)
    • OT-708 (2ATGMX1-16G XN16NB25; 2ATLMX1-16G XN16NE21)

  2. Read unlock codes, Format FFS, Flash, Backup/Restore options for the following Alcatel models:

    • OT-216
    • OT-380
    • OT-505
    • OT-508
    • OT-708 (beta test)

  3. World Exclusive! Implemented autodetect function for the cell phones with disabled unlock code menu*, activation of unlock code request for all supported MTK-based phone models.

  4. Interface improvements. Active unlock codes are now marked black, inactive are marked grey. Cell phone doesn't ask inactive unlock codes.

* In cases if unlock code request is blocked by service provider (handset doesn't ask / doesn't accept unlock codes).


Smart-Clip ON!
Continue reading →

Complete Installer SpiderMan V2.70

Complete Installer SpiderMan V2.70

Released on26 Jan, 2011
*v2.70
1.Spreadtrum improved.
2.Some bug fix,Complete 2.70 version.

If you have custom cable pinouts,please backup C:\SpiderMan\Ini_File\cable.txt file when you install.


Download from spiderman server

download from mirrorcreator.com
Continue reading →

Octopus Box v 1.7.1 is out!

Octopus Box v 1.7.1 is out! We have added support for LG T320, LG T320e, LG T320g, LG T325, LG KM555R, LG KM555G, LG KM555GO, LG KM555RGO, LG GS117, and world's first support for LG KU2000 and LG SU200!


Octopus Box v 1.7.1 Release Notes:
  • KU2000, SU200 – added world's first Unlock, Write Firmware, Repair IMEI, Repair Bluetooth Address
  • T320, T320e, T320g, T325 – Unlock (by reading codes), Write Firmware, Read/Write/Repair EEPROM, Repair IMEI
  • KM555R, KM555G, KM555GO, KM555RGO – Unlock (by reading codes), Write Firmware, Read/Write EEPROM, Repair IMEI
  • GS117 – Unlock (direct and by reading codes), Write Firmware, Read/Write/Repair EEPROM, Read/Write Full Flash, Repair IMEI

check here....
http://www.youtube.com/watch?v=_7T6kcGLFIE




Download latest installer from official site here
Continue reading →

UFC selector v.3 [2011]

Continue reading →

BB5 ENO (ENGINE SOFTWARE) Latest Firmware !!!

What is ENO software:
ENO software handles all basic functions inside the device. It is required to be flashed into the device when Combo Memory is Changed due to by some wrong operations like; Downgrade Phone wrongly, Flash with wrong Firmware, Erase Phone with wrong file or Phone is on White or Blank display.

After flash with ENO Firmware your phone will be normalized and then you simply flash again with correct firmware package, select any product code according to your choice and press Flash button.


Download ENO Firmware:

N95 RM-159
http://www.4shared.com/file/11709310...tware_v30.html

N95 (8 GB) RM-320
http://www.4shared.com/file/11709598...tware_v30.html

N81 RM-223
http://www.4shared.com/file/11709452...10045_v00.html

N81 (8 GB) RM-179
http://www.4shared.com/file/11709362...110045_v0.html

N85 RM-333
http://www.4shared.com/file/11709644...v0030_v10.html


alternative super fast link
........



N95 RM-159
N95 (8 GB) RM-320
N81 RM-223

N81 (8 GB) RM-179


N85 RM-333
Continue reading →

How to flash Nokia X6 in dead USB mode using Fenix Key

Continue reading →

Nokia E66 Maintainance with New Fenix Key Suite

Continue reading →

How To Flash Firmware on Nokia 6120c with Fenix-Key

Continue reading →

5530_usb_flashing

Continue reading →

Fenix Key external support area

Continue reading →

How to activate Fenix Key

Continue reading →